VW Vortex - Volkswagen Forum banner

VR6 Turbo Application

24K views 3 replies 3 participants last post by  BLSport 
#1 ·
I have done a good amount of searching on Water/Meth for VR6 Turbo's without any luck. Most of what I am finding if pre-2012. Why is that? I see the dual part spacer for the VR6 applicatoin on the USRT site, is there any feedback on that kit?
 
#2 ·
What are you wanting to know? I ran a devil's own kit with a progressive controller about 7 years ago with kinetic stage 1 and a 30# c2 tune. I made 306whp and 310 wtq on 12 psi running a 50/50 mix. Stock motor, 3" turbo back. It didn't "add" power but I definitely didn't lose power from hot intake temps. I'm sure I could have "tuned" it to squeeze out some more power. I'm not sure if the kinetic stage 1 is around anymore but it didn't have an intercooler. I imagine the core information on w/m hasn't changed too much. I am scoping out a setup for my new 1.8tsi and the basic kits don't seem all that dissimilar.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top