VW Vortex - Volkswagen Forum banner

Tired of squeaking struts on your MkVI Volkswagen Golf R? 034Motorsport Density Line Strut Mounts can help!

8K views 49 replies 5 participants last post by  034Motorsport 
#1 ·
Are you sick of hearing squeaking noises coming from the front suspension and strut towers when driving over bumps? Are you getting ready to install lowering springs or coilover suspension, and want to prevent premature failure of the factory strut mounts? 034Motorsport Density Line Strut Mounts are the ideal solution engineered specifically to solve these common issues while providing improved handling and increased performance! :thumbup:

Strut Mount, Track Density, MkV & MkVI Volkswagen, 8J & 8P Audi



We're proud to announce that Density Line Strut Mount for MkV & MkVI Chassis Volkswagen and 8P & 8J Chassis Audi models are back in stock and ready to ship! - Click Here to Learn More!

034Motorsport's Density Line Mounts are the new standard in comfort and performance. Our mounts are redesigned with performance in mind, and manufactured from high-durometer rubber for increased performance and durability, without sacrificing comfort. Density Line Mounts are void-free and fluid-free, eliminating the slop associated with the factory mounts.

The Track Density Strut Mount is manufactured from 75 durometer rubber, which is approximately 50% stiffer than stock. The rubber is also fully vulcanized to the center cups to increase the lifespan and performance of the mounts significantly. The steel strut mount bodies have also been redesigned to cope with the added stresses of spirited driving.

The result is a significant reduction in deflection of the strut mount. These mounts will also eliminate the annoying "squeaking" sound often caused by the stock strut mounts when paired with coilover suspensions. Track Density Strut Mounts will only cause a minimal increase in noise, vibration, and harshness (NVH) inside of the cabin. These mounts are a completely re-engineered performance solution, not just inserts for use with the factory mounts.



Features:
  • Manufactured from 75 Durometer Rubber
  • Rubber Fully Vulcanized to Center Cups
  • Eliminated "Squeaking" Sound Casued by Factory Strut Mounts
  • Reduced Strut Mount Deflection
  • Maintain Proper Suspension Geometry Under Load
  • Improved Steering Feel & Handling
  • Complete Drop-In Replacement of Factory Strut Mounts
Fitment:
  • 2006 - 2013 Audi A3 (8P)
  • 2006 - 2013 Audi TT / TTS / TT RS (8J)
  • 2005 - 2009 Volkswagen Eos / GLI / GTI / Jetta / R32 (MkV)
  • 2010 - 2013 Volkswagen Eos / Jetta / GLI / Golf / GTI / R (MkVI)
  • 2006 - 2013 Volkswagen Passat / CC (B6)
  • 2008 - 2013 Volkswagen Tiguan
  • 2012 - 2013 Volkswagen Rabbit
Replaces:
  • 8J0 412 331 / 8J0412331
  • 1K0 412 331B / 1K0412331B
  • 1K0 412 331C / 1K0412331C
Click Here to Order!
 
See less See more
1 1
#29 ·
Hot off our CNC machines we just released our Subframe mount inserts!

Audi/Volkswagen vehicles equipped with Haldex AWD utilize rubber subframe bushings which deflect under load, causing the rear end to feel vague and loose, as well as leading to less-than-optimal suspension geometry and increased understeer. This precisely engineered billet aluminum insert kit is designed to fill voids in the factory rear subframe mounts, and limit subframe movement without sacrificing ride quality or introducing any perceivable additional noise, vibration, or harshness into the cabin. The result is a more refined, connected driving experience, as well as improved effectiveness of aftermarket rear sway bar upgrades and suspension components.

*Engineered to Fill Voids In Factory Rear Subframe Mounts
*Helps Maintain Proper Suspension Geometry When Cornering
*Reduces Rear Subframe Movement During Launches & Acceleration
*Improves Shifting Feel, Resulting in Crisper Shifts
*Virtually No Additional NVH Transfer Inside Cabin
*Easy, Straightforward Installation

REAR SUBFRAME MOUNT INSERT KIT
 
#32 ·
This week only, we're offering Free Domestic Shipping for all orders over $75, and Free International Shipping for all orders over $500!


Click Here to Get Your 034Motorsport Go Fast Parts!




Terms & Conditions: Free Shipping Promotion valid for retail customer orders placed between 12:01 AM Pacific Time on Saturday, October 15th and 11:59 PM on Sunday, October 23rd. Cannot be combined with other Discounts, Promo Codes, Gift Cards, Quotes, or Coupons.
Cannot be applied to orders retroactively. Must select Free Shipping option during checkout.
 
#35 ·
Trailing arm bushigns have been updated! They will not come with the complete arm with the bearing pressed in to save you some time and money!

Features:

Fully Assembled with New Factory Steel Trailing Arms - Simple Bolt-In Installation!
Genuine Aurora Spherical Bearings Featuring Teflon Race Lining
Billet Aluminum Bearing Holders - Anodized Black
Stainless Steel Bearing Spacers
Improved Handling & Road Feel
More Precise & Predictable Handling
Fully Rebuildable


SPHERICAL REAR TRAILING ARM KIT, MKV/MKVI VOLKSWAGEN GOLF/JETTA/GTI/R & 8J/8P AUDI A3/S3/RS3/TT/TTS/TTRS


 
#38 ·
Looking for rear adjustable control arms to get more camber? Well, look no further!
Features:
Billet Aluminum Construction - Anodized Black
Genuine Aurora Spherical Bearings
Approximately 5 Degrees of Camber Adjustment (-2.4 Degrees or +2.6 Degrees)
Adjustable in 1/36" Increments. Each 1/36" Corresponds to ~0.18 Degrees.
Dust boots now included!

034MOTORSPORT, REAR UPPER ADJUSTABLE CONTROL ARMS

 
#40 ·
In the Fremont California area? Don't miss out on our open house!

Dynos starting at $79 or $89 for three pulls!


NorCal Audi Club and 034Motorsport bring you WinterFest 2016! Join us at 034Motorsport for another great meet with food, cars, and fun!

We'll be hosting the 4th Annual NorCal Audi Club WinterFest as well as another 034Motorsport Dyno Day & Open House on Saturday, January 21st! We'll have all of the attractions you're used to, as well as a few extras:

Cars & Enthusiasts - Bring your stock or modified Audi, meet fellow enthusiasts, see their cars, and get an in-depth look at some of 034Motorsport's race cars and projects.

Food & Drinks – This year Javad is bringing plenty of home-made chili, and we’ll have drinks and snacks on hand for you as well.

Open House - We will be giving tours of the 034Motorsport Facility, including our Service Department. This is your chance to see how our parts are made, and get a behind-the-scenes look at what goes on here at 034. :)

Discounted Products - We will be offering 10% off all 034Motorsport-branded products and merchandise at the event, as well as discounted pricing on 034Motorsport ECU Upgrades.

Free Raffle - Everyone who attends can enter their name in our free raffle, featuring items from 034Motorsport.

Dyno Runs - We are offering great deals on baseline dynos, and accepting 16 cars. See what you car makes on our Mustang AWD Dyno, or just check out some of the other cars doing pulls.

Dyno registration


Facebook event
https://www.facebook.com/events/1213223295433433/
 
#43 ·
#50 ·
Did you know that BMP TUNING has 034Motorsport products in stock ready to ship?

Make sure to check them out!

034MOTORSPORT AND BMP TUNING ESTABLISH AN OFFICIAL PARTNERSHIP IN THE CENTRAL-SOUTHERN USA







Press Release

August 30th, 2017

Carrollton, TX

Today, 034Motorsport is fortifying its brand presence in the Central-Southern USA by announcing a regional distributor partnership with BMP Tuning.

This exciting partnership will enable existing dealers to get inventory faster, and allow 034Motorsport to be represented to more new shops in Texas, Oklahoma, Kansas, Missouri, Arkansas and Louisiana. BMP Tuning will be the exclusive wholesale distributor in these six states.

“You’ll find few people in this industry as great to deal with as Autrey from BMP Tuning. He brings a fresh passion to the VAG aftermarket that’s exciting to see. This made the decision to partner with BMP Tuning very easy for all of us here at 034Motorsport,” States Troy Sicotte, Global Director of Sales for 034Motorsport. “BMP Tuning has committed to being in stock, and will be instrumental to getting our parts to existing dealers quickly, while expanding the dealer network in states where we have limited penetration.”


“Our goals are to help grow brands by representing them in a positive light. I treat each and every brand BMP Tuning represents as if it was my own company. By doing that on all levels, we are able to represent manufacturers in a way that benefits them more so than just slinging parts. We’re committed to applying this ethos to 034Motorsport in the six states we represent,” states Autrey McVicker, Owner of BMP Tuning. “We feel that the team at 034Motorsport are similar in thinking and aligned with our goals which makes it a great fit. We want to help grow 034Motorsport in our region, contributing to their amazing evolution, and be a major part of the brand’s ongoing wholesale expansion.”

Dealers can set up an account with BMP Tuning by contacting Eddie, their wholesale representative, directly:



Wholesale Email: eddie@bmptuning.com

Phone: 972-677-7604

Website: www.bmptuning.com

Address: 2125 Chenault Drive Suite 102 Carrollton, TX 75006
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top